Excellent

2026-02-11    -Leong Fook Sheng

Good gadget to have for all driver to monitor the car performance....

Fácil instalación y uso.

2026-02-06    -Billy

Facil de usar e instalar.Buena comunicación con teléfono móvil.Funciones limitadas pero esenciales para el diagnóstico general del auto.

5.0 out of 5 stars Amazing scanning tool for the price and value.

2026-01-09    -Bob

I have owned several scanners, this is by far the best. This connects to your OBD, you turn on the app on your phone and you are ready to rock. I am impressed by extra features that are usually only available on larger more professional models. I keep this in the car in case I am out or a friend runs into an issue. It works right out of the box, no batteries, no cords. It has numerous complex scans that you have a bit of a learning curve to fully utilize. For the price and ease, every simple function that requires a breakdown can be done in a couple of minutes. It allows you to reset codes, scan and even tells you of numerous potential problems. Then it shows you the part and part number to order for replacement. I usually run the scan then snapshot the problem, then reset and wait for the issue to appear again. Many times it just goes away. Always double check the diagnosis with chat GPT for possible other problems.

Thanks

2026-01-14    -Shoyab

Thanks

Excellent

2026-01-30    -Leong Fook Sheng

Good gadget to have for all driver to monitor the car performance....

5.0 out of 5 stars Excellent product. Easy to use. Well worth it.

2026-03-07    -B

Been using mine for 3 years and it has been great. I leave it always plugged into my truck so that it is ready to use if I get a check engine light or even if I'm just curious about how the engine is running.It is well worth having, as it has saved more than its cost in not having to pay for diag time at the shop for minor problems that are easily fixed with an off-the-shelf part or when dropping off for things like the inevitable emissions sensor that goes bad. Being able to tell them "It's theowing this specific permanent code and it started on this date," before even taking it in saves paying for that time amd has saved time, as well, as they'll usually order the parts right then, so they can get it done a day sooner when dropping it off. 👌For any code you get, it tells you what it is, likely fixes for it, and even shows a chart of how many people reported each potential fix as being what resolved the same code for them, PLUS usually a link to buy the part on Amazon if you want to.Also handy for clearing unimportant temporary codes that still throw a MCL/check engine light, since that's one of the only caution lights vehicles have these days, as well.Aside from problems, it can show you real-time data from the vehicle's computer for every sensor it has, which is pretty nifty even if you aren't using it to tune the engine or anything like that. You can gain insights into why maybe the engine feels rough or why it's not accelerating like you normally expect, for instance, by seeing timing information, engine load values, actual throttle position, fuel flow rate/pressure, more temperatures than you ever thought necessary, and more depending on the vehicle.And using it is a cinch. Just plug it into the ODBII port, fire up the app, and it'll find the sensor. Then, pick whether you want to see live data, scan for problem codes, add maintenance info, etc. It'll even show you codes that *don't* cause a warning light, which can help you get ahead of things before they become expensive problems. And it saves it all in history on your phone that you can export to excel or share with the shop or whoever you want.And it isnt tied to a vehicle, so you can just pop it into any vehicle, tap scan codes, and be done with it when your buddy complains their car is showing a check engine light.Overall a great product and does exactly what it claims. Couldn't be simpler to use, and has had zero compatibility issues with any Android phone I've ever used with it.

4.0 out of 5 stars BlueDriver Scan Tool Review. There is good and bad points but only based on our personal experiences. Your mileage may vary

2026-01-06    -Corrinne Heartley

This review is written by the husband of the account holder. She bought this for me as a tool to help diagnose a issue with our vehicle. So the following are his words and not necessarily shared by the account holder.My (Hubby's) thoughts on Amazon: "They are liars and I will never order from them again! They have done nothing but screw up the shipping of this product from blaming Lemur to just plain outright telling a lie! Yes they did refund shipping and compensated my wife for this crap but it will be a COLD DAY IN HELL WHEN I WILL PURCHASE FROM AMAZON AGAIN!" The shipping and lying fiasco is partially why the rating is low. Some of the rating comes from the product itself. So let me get the issues out of the way first and then I will get to the good things. Which there are more good than bad I promise!Oh and another disclaimer: Use this tool as a diagnositc aid only!! This tool and others like it help point you in the direction of a fix and does not explicitly tell you what is wrong. So please use this tool to help get you pointed in the right direction. Just don't replace parts, use the tool to get direction, diagnose and then fix.Now to the issues I personally had with this tool:The live data PIDS take several restarts of the application to get to come online. I'm not sure if this is because of a special issue with my vehicle or what the issue is. This is annoying but can be overseen. I personally am a impatient person and like stuff to work the first time around.The second issue is issues that I have with a feature of the tool called Mode 6. My vehicle supports this and I was excited to see what all I can see however this is where the issues arise. The first issue is the app on the phone locks up sometimes when trying to go into mode 6. This isn't cool at all. A restart of the app fixes this as well. However once I get into mode 6, I get PID/TID readouts that are not human readable! I get TID/PID numbers and the output is in HEXIDECIMAL readout. The HEX part I know from working with computers however without a TID/PID chart, the data is WORTHLESS! In Lemur's instructional video on mode 6, they show you tapping on a TID/PID and it tells you what it does. On my vehicle, it gives some generic message which again is worthless. So mode 6 on this tool is completely worthless to me!A issue that seemed to correct itself through use is the repair reports. At first, I could not get the repair reports for the error codes on my vehicle then yesterday 12/29/15 I tried again and I was able to get the reports! Coolness!Now onto the good points!The tool will work with both Apple and Android mobile devices. I only was able to test on an iPhone so I cannot say how good or bad the Android device app is. The app and tool are updateable! As Lemur finds thing that need to be patched, they allow the app and the tool to be updated which is very nice indeed!The tood depending on what capabilities it knows about and what the computer allows, can not only scan engine codes but codes from other systems as well! Including ABS, Transmission and more! I ran into a snag on reading TPMS when I tested this tool on another vehicle. Lemur was notified and they are looking into a cause of why it couldn't read the codes from the TPMS systems of that vehicle. Might be that the computer didn't allow the tool access? Not sure.The tool once it finds issues will reveal the codes that are being reported. Then you can get a repair report. These diagnostic aids tell you what the code is and what are the most likely culprits that are causing it. Again use this as a diagnostic aid and not gospel for finding out the issue. This I feel is a nice feature!The tool can clear out the trouble codes. However I do wish that Lemur would tell you what state the car needs to be in to clear the codes. Like my vehicle has to be in the run position but engine off in order to clear the codes. Some cars need to be running. I think a safe bet here is key to run but engine off.The tool can check for smog rediness which for emissions is a definite must!If your vehicle supports it, the tool can check the status of the check engine light for parameters such as how long the light has been on and when the last time the light was reset. Again only if your computer supports it.The tool can decode a VIN and tell you where the car was made, what engine is in it, and all sorts of goodies. The tool makes an effort to figure out the VIN from the computer. However if it cant, then you can either manually enter it with a keyboard or if your car has a VIN barcode, you can take a picture of the VIN right in the app and it will fill in that blank for you! That is awesome!The live data tool is very good tool indeed! Depending on what you engine will allow to be read, you can see in real time what the engine is doing and help you narrow down what might be wrong!Best of all, a lot of the data from this tool like the Live Data, smog rediness, repair reports, etc can be exported out of the tool so if you need to analyze them on a computer or send to a friend that is more mechanically inclined, you can do so. A word of warning about the Live Data, it will only export out the PIDS you've selected and it only exports out data in a CSV (Comma Seperated Values) format useful in spreadsheets. It does not export out the pretty graphs ( I haven't found a way to export the graphs at least) that the tool generates.Would I personally consider this a professional tool? Possibly. Reasoning for my thinking is the mode 6 data/testing is useless to me as of this review. I noticed that some of the sensor PIDS are not even in the tool to be read or read in a certain way and should be if this is to be considered a professional tool.Case in point is the Cam and Crank sensors. Maybe this in in the mode 6 data however I do not know because again I can't read it and I cannot gain access to a TID/PID chart for this. Reason why reading the cam and crank sensors would be good is for a crank but no start condition. Even if we had a PID that would tell us that the cam and crank was in sync would help here. Without reading this data, this tool cannot help you with a crank but no start.At least on my vehicle which happens to be a 02 Jeep Liberty.However if you need a fairly inexpensive tool that is compact, fairly easy to use, updateable, IMHO very good support and can be used a a way to constantly monitor the vehicle (you can leave plugged in), this tool can definitly help with your vehicular woes. Maybe when the tool gets more updates, I will come back and update this review.If y'all are wondering if this has helped me with our vehicle? The answer is yes! I was able to get some live data and it is pointing to a few things that could be wrong with the vehicle. Once I get a clear day, I will get to cracking on this!Hope this helps someone.

Blij mee

2026-02-12    -Ben

Heb er een airbagprobleem mee opgelost,,een reparatie die je zonder uitlezen van de storing niet zelf kan. De meeste obd2 hobby scanners lezen de airbag data niet uit, deze dus wel ,en met succes . In mijn geval heeft de bluedriver zichzelf terug verdient .. Ook een paar oude ABS storing codes mee kunnen wissen. DISCLAMER......Overigens moet je bij het werken aan airbagsytemen sowieso weten wat je doet ivm gevaar van afgaan van de airbags als je het verkeerd doet, bij twijfel NIET zelf doen....

Thanks

2026-01-10    -Shoyab

Thanks

5.0 out of 5 stars Amazing scanning tool for the price and value.

2026-02-18    -Bob

I have owned several scanners, this is by far the best. This connects to your OBD, you turn on the app on your phone and you are ready to rock. I am impressed by extra features that are usually only available on larger more professional models. I keep this in the car in case I am out or a friend runs into an issue. It works right out of the box, no batteries, no cords. It has numerous complex scans that you have a bit of a learning curve to fully utilize. For the price and ease, every simple function that requires a breakdown can be done in a couple of minutes. It allows you to reset codes, scan and even tells you of numerous potential problems. Then it shows you the part and part number to order for replacement. I usually run the scan then snapshot the problem, then reset and wait for the issue to appear again. Many times it just goes away. Always double check the diagnosis with chat GPT for possible other problems.