고객 서비스

판매자들은 가입하면 더 많은 혜택을 누릴 수 있습니다.

모든 주문 무료 배송.

스마트 도어락

Kwikset SmartCode 916 Z-Wave Smart Lock, Keyless Entry Zwave Door Lock, Touchscreen Electronic Deadbolt, SmartKey Re-Key Security, Smart Hub Required, Traditional Satin Nickle

4.20

지난 32시간 동안 판매됨 32

$ 189.99
$ 190.00
-0.01%

I purchased this lock for the touchpad features as well as the capability to integrate into my home automation system via Z-wave. I ran into a small issue during installation that I was able to resolve. I feel it might be helpful to inform others on how to resolve, since it was a simple fix (but not obvious).The issue: The turnpiece (knob on inside to turn to lock and unlock) and shaft were pointing 180 degrees in the wrong direction. The turnpiece should be oriented pointing up when the lock is closed was instead pointing down and limited in range. Since the shaft (from the outside part of the lock) that mates with the turnpiece is keyed (looks like a "D" in profile), it must be oriented in a specific way to mate correctly. Since the turnpiece was oriented in the wrong direction and has stops limiting the range, it appeared that the only way to make this work would be to install the part of the lock visible inside the house upside down. Clearly unacceptable.Long story short: I started the return process with Amazon and the first recommendation that appeared was to call Kwikset customer service. I called and resolved the issue over the phone in about 10 minutes. It was quick and right to the point.The resolution: I was asked to hold the inside half of the lock (together with electronics /motor still inside) and turn the turnpiece (knob) to the upright orientation (pointing up). The knob/shaft had some resistance - stops - that I had to firmly turn past in order to get the correct orientation. Once the orientation was correct, I was able to pull the insides out of the back case (per the instructions) and continue the installation as per the instructions. Well it worked!Final notes: This was a direct replacement for a deadbolt. Except for the small issue above, it was really easy and relatively straightforward. Not only was the installation quick and easy, but the pairing to my home automation system was simple. The lock looks good and functions exactly as expected. I only wish they would have included this troubleshooting tip either in the instructions or online.

17 현재 누군가가 웹사이트를 탐색 중입니다.

Color
Satin Nickel Venetian Bronze
Size
Old Version
Style
Traditional
수량:
- +

예상 배송 시간: 12~26일(국제), 3~6일(미국)

구매일로부터 45일 이내에 반품이 가능합니다. 관세 및 세금은 환불되지 않습니다.

  • ASIN:

    B07F3FBRXH

  • BATTERIES:

    4 AA batteries required. (included)

  • BATTERIES_INCLUDED:

    Yes

  • BATTERIES_REQUIRED:

    Yes

  • BATTERY_CELL_TYPE:

    Alkaline

  • BEST_SELLERS_RANK:

    #157,241 in Tools & Home Improvement (See Top 100 in Tools & Home Improvement) #569 in Deadbolts

  • BRAND:

    Kwikset

  • COLOR:

    Satin Nickel

  • CONNECTIVITY_PROTOCOL:

    Z-Wave

  • CONTROL_METHOD:

    Touch

  • CUSTOMER_REVIEWS:

    4.2 4.2 out of 5 stars (878) 4.2 out of 5 stars

  • DATE_FIRST_AVAILABLE:

    June 28, 2018

  • FINISH:

    Brushed

  • FINISH_TYPE:

    Brushed

  • GLOBAL_TRADE_IDENTIFICATION_NUMBER:

    00883351614993

  • INCLUDED_COMPONENTS:

    Deadbolt exterior, Deadbolt interior, Two keys, Latch, Strike Plate, Adapter Ring, Installation and Mounting Hardware, SmartKey learn tool, Installation and User Manual

  • IS_DISCONTINUED_BY_MANUFACTURER:

    No

  • ITEM_DIMENSIONS_L_X_W_X_H:

    4.27 x 3.99 x 9.74 inches

  • ITEM_MODEL_NUMBER:

    99160-020

  • ITEM_PACKAGE_QUANTITY:

    1

  • ITEM_WEIGHT:

    3.52 pounds

  • LOCK_TYPE:

    Keypad

  • MANUFACTURER:

    Kwikset

  • MATERIAL:

    Metal

  • MODEL_NAME:

    99160-020

  • NUMBER_OF_PIECES:

    2

  • PART_NUMBER:

    99160-020

  • POWER_SOURCE:

    Battery Powered

  • PRODUCT_DIMENSIONS:

    4.27 x 3.99 x 9.74 inches

  • RECOMMENDED_USES_FOR_PRODUCT:

    Security

  • SHAPE:

    Rectangular

  • SIZE:

    Old Version

  • SPECIAL_FEATURE:

    Smart Lock,Touchscreen

  • SPECIAL_FEATURES:

    Smart Lock,Touchscreen

  • STYLE:

    Traditional

  • UPC:

    883351614993

안전한 결제를 보장하세요
제품 상세 정보
The SmartCode touchscreen smart lock with Home Connect technology enables the lock to wirelessly communicate with other devices in home. The lock allows the user (through a web enabled device) to remotely check the door lock status, lock or unlock the door and receive notifications. SmartCode is a one-touch locking motorized deadbolt. With your personalized code, you can enter your home with the convenience of keyless entry and the back-lit keypad provides increased visibility. It features patented SecureScreen™ technology to prevent code detection from fingerprints on the touchscreen. This SmartCode deadbolt is easy to install, program and use, and operates on 4 AA batteries. It also features SmartKey Security as the back-up keyway. Kwikset smartcode dead bolts are available as smart locks and as electronic deadbolts to provide keyless entry and access for your daily life similar to our Kwikset Kevo door lock. Our Kwikset locks come with patented Kwikset only security features including- Kwikset smartkey security and SecureScreen. Our front door locks are the smart choice whether you are searching for a keypad lock or a touchscreen lock with multiple finishes including satin nickel, venetian bronze, and polished chrome. From august to december Kwikset deadbolts are the locks for year-round keyless entry. Kwikset smartcode home connect means our kwikset z wave locks works with amazon alexa, smartthings, and wink smart home hubs for smart home automation.
고객 리뷰
4.20

(100 점수)

5
10
4
6
3
4
2
12
1
68
댓글 취소
댓글을 남겨주세요

18 논평

5.0 out of 5 stars Great Lock
2026-01-12    -Rob

Was able to easily replace old worn out lock with this new model. Looks great and works well. Really like the touch screen instead of the button model. Was easy to connect to z-wave for use with our current alarm system.

I purchased this lock for the touchpad features as well as the capability to integrate into my home automation system via Z-wave. I ran into a small issue during installation that I was able to resolve. I feel it might be helpful to inform others on how to resolve, since it was a simple fix (but not obvious).The issue: The turnpiece (knob on inside to turn to lock and unlock) and shaft were pointing 180 degrees in the wrong direction. The turnpiece should be oriented pointing up when the lock is closed was instead pointing down and limited in range. Since the shaft (from the outside part of the lock) that mates with the turnpiece is keyed (looks like a "D" in profile), it must be oriented in a specific way to mate correctly. Since the turnpiece was oriented in the wrong direction and has stops limiting the range, it appeared that the only way to make this work would be to install the part of the lock visible inside the house upside down. Clearly unacceptable.Long story short: I started the return process with Amazon and the first recommendation that appeared was to call Kwikset customer service. I called and resolved the issue over the phone in about 10 minutes. It was quick and right to the point.The resolution: I was asked to hold the inside half of the lock (together with electronics /motor still inside) and turn the turnpiece (knob) to the upright orientation (pointing up). The knob/shaft had some resistance - stops - that I had to firmly turn past in order to get the correct orientation. Once the orientation was correct, I was able to pull the insides out of the back case (per the instructions) and continue the installation as per the instructions. Well it worked!Final notes: This was a direct replacement for a deadbolt. Except for the small issue above, it was really easy and relatively straightforward. Not only was the installation quick and easy, but the pairing to my home automation system was simple. The lock looks good and functions exactly as expected. I only wish they would have included this troubleshooting tip either in the instructions or online.

I first integrated this with a Universal Devices ISY-994 controller over z-wave and it worked great! I later integrated it with my Ring Alarm and I am even happier because the Ring integration is very clever and intuitive. If there are multiple users setup on the Ring Alarm panel, the same code can be used to unlock/lock the door as well as disarm/arm the alarm. Ring app will tell you who unlocked the door.

I first integrated this with a Universal Devices ISY-994 controller over z-wave and it worked great! I later integrated it with my Ring Alarm and I am even happier because the Ring integration is very clever and intuitive. If there are multiple users setup on the Ring Alarm panel, the same code can be used to unlock/lock the door as well as disarm/arm the alarm. Ring app will tell you who unlocked the door.

Easy to install, easy to pair, works great
2026-02-18    -Tim Ducharme

Swapped out a 910 which has no keypad just a key lock with zwave - still working just fine for a couple years - this one is now on the back door. Anyway the 916 with touch pad is so much more convenient... also is zwave + and is smaller and quieter! The original shipment came in wrong color, but Amazon quickly sent a replacement... easy to pair to vera plus... easy to program codes... easy to install... and easy to re-key. Works great!

very secure
2026-02-25    -gb

these were totally inclement weather resistant unlike other brands where the canadian weather did them in.

I purchased this lock for the touchpad features as well as the capability to integrate into my home automation system via Z-wave. I ran into a small issue during installation that I was able to resolve. I feel it might be helpful to inform others on how to resolve, since it was a simple fix (but not obvious).The issue: The turnpiece (knob on inside to turn to lock and unlock) and shaft were pointing 180 degrees in the wrong direction. The turnpiece should be oriented pointing up when the lock is closed was instead pointing down and limited in range. Since the shaft (from the outside part of the lock) that mates with the turnpiece is keyed (looks like a "D" in profile), it must be oriented in a specific way to mate correctly. Since the turnpiece was oriented in the wrong direction and has stops limiting the range, it appeared that the only way to make this work would be to install the part of the lock visible inside the house upside down. Clearly unacceptable.Long story short: I started the return process with Amazon and the first recommendation that appeared was to call Kwikset customer service. I called and resolved the issue over the phone in about 10 minutes. It was quick and right to the point.The resolution: I was asked to hold the inside half of the lock (together with electronics /motor still inside) and turn the turnpiece (knob) to the upright orientation (pointing up). The knob/shaft had some resistance - stops - that I had to firmly turn past in order to get the correct orientation. Once the orientation was correct, I was able to pull the insides out of the back case (per the instructions) and continue the installation as per the instructions. Well it worked!Final notes: This was a direct replacement for a deadbolt. Except for the small issue above, it was really easy and relatively straightforward. Not only was the installation quick and easy, but the pairing to my home automation system was simple. The lock looks good and functions exactly as expected. I only wish they would have included this troubleshooting tip either in the instructions or online.

I have a front entry door i dont use much, but its handy to be able to enter a code or use my phone to enter the house. Having the screen automatically change number location is a security plus(which everyone should do). The unit works as expected except the battery life. I use the door maybe four times a month(meaning i dont undo the deadbolt myself ) and within 6 weeks the little red light is blinking. It starts blinking well before my smartthings app warns me the battery is low though, so you are better to have it linked in to get a clearer picture of the battery as the led indicator jumps the gun a bit ( like 2 weeks ). I switched to rechargeable batteries from standard batteries, no noticeable change in operating capabilities or battery life. Useful so i am not buying batteries all the time. The battery life is why i took one star off.As for the install, that took a little bit of effort but if you follow the instructions to the letter and dont assume things, you will be just fine. Make sure your bolt is straight on with the door frame and you may need to pick out more door frame if your old bolt was smaller ( i had to with a wood chisel for easy clean lines ). Use the security screws to ensure someone kicking the door in has a hard time.I also bought the zwave enable smartcode unit with the manual push buttons for my garage entry door, the batteries on that last like 4 months and i use it every day, twice a day. Also relatively straight forward to install.

Easy to install, easy to pair, works great
2026-01-18    -Tim Ducharme

Swapped out a 910 which has no keypad just a key lock with zwave - still working just fine for a couple years - this one is now on the back door. Anyway the 916 with touch pad is so much more convenient... also is zwave + and is smaller and quieter! The original shipment came in wrong color, but Amazon quickly sent a replacement... easy to pair to vera plus... easy to program codes... easy to install... and easy to re-key. Works great!

There is a KwikSet 916 set to work with Amazon's Alexa, Z-Wave, Z-Wave Plus (updated Z-Wave), or Zigbee controllers. You'll need to know what smart controller you plan to sync the electronic lock to. One doesn't need to sync to a smart home controller for it to work, just to take advantage of programming possibilities as well as have up to 30 unique pincodes (you are limited to 16 w/out a smart home controller). KwikSet does sell a controller that one can sync to a wireless router as an alternative to a smart home controller. Think KwikSet's controller is about $90.Replacing an existing deadbolt is straightforward, the instructions were well written, albeit a bit small to read. Suggest going to KwikSet's website to watch the video on installation. If you are going to installing w/ a home controller, it may be required to connect the two halves and power up within 3 to 5 feet of the controller. This is to ensure a secure pairing with a low-powered signal from the controller to the electronic lock.The outside faceplace is no thicker than a standard deadlock. The inside faceplace is thicker as this holds the 4-AA battery pack (4 batteries were included).To wake up the lock, press one's palm or three fingers on the faceplace. If you have the added security feature activated (there is a dip-switch setting to turn this on/off) two random numbers will appear (e.g.: 3 and 8). You can press these numbers in low number to high number or vice-versa. After this, all the entries will light up on the faceplace. This is where you enter the unlock pincode (four to ten digit number).If one enters a bad or incomplete pincode, the faceplate will flash the 1 3 5 7 9 numbers and then re-display all the values again. As I am writing this, do not recall if there is a lockout if a bad pincode is entered multiple times. Will read through the documents again. With it synced with a controller, you'll get a message it time it is used.Different home controllers may offer different options, like restricting certain pincodes to certain day(s)/certain time(s) or a specific date and time-window. Each should allow you to receive a text message or email any time the lock is engaged.Took about 30 minutes to install, included time to read the instructions and remove the old deadlock. After one attaches the outside and inside faceplates suggest to not test the lock as the internal mechanism needs to zero-out the throw of the lock. There is a step in the instructions after installing the outside faceplace with the inside mounting bracket so as to test the lock movement.If you already are using KwikSet locks, you can re-key the new lock w/ your existing keys. If you do not have Kwikset locks, then there is a set to check your current home key w/ the lock for compatibility. The re-keying of the lock takes 5 seconds and the re-key tool is included w/ the kit.Have written KwikSet if there is a lockout after repeated 'bad' pincode entries.

댓글을 남겨주세요:

댓글 제목
댓글 내용
배송 및 반품
우리가 당신을 보호하겠습니다

대부분 지역에서는 배송비를 한 번만 지불하시면 됩니다 (주문 및 배송 페이지를 확인해 주세요).

구매 후 14일 이내 무료 반품 가능 (단, 수명이 다한 제품, 맞춤 제작 상품, 마스크, 향수 및 에어로졸과 같이 위험하거나 인화성 물질이 포함된 일부 제품은 제외).

수입 관세 정보

복잡한 절차는 저희가 처리해 드리겠습니다. 카나리아 제도를 제외한 모든 EU 국가, 영국, 미국, 캐나다, 호주, 뉴질랜드, 푸에르토리코, 스위스, 싱가포르, 한국, 쿠웨이트, 멕시코, 카타르, 인도, 노르웨이, 사우디아라비아, 대만, 태국, UAE, 일본, 브라질, 맨섬, 산마리노, 콜롬비아, 칠레, 아르헨티나, 이집트, 레바논, 홍콩 특별행정구, 바레인, 터키로 배송되는 상품 가격에는 모든 수입 관세가 포함되어 있습니다. 표시된 가격이 최종 결제 금액입니다.

예상 배송 시간

특급 배송: 7-10일

해당 창고에서 배송되었습니다.

더 자세한 정보가 필요하신가요?
반품 정책
반품 정책

저희는 제품 품질에 자신 있습니다. 만약 구매하신 제품에 완전히 만족하지 못하신다면, 수령일로부터 30일 이내에 간편하게 반품하실 수 있도록 정책을 마련해 두었습니다.

간편한 교환 또는 환불
  • 다른 사이즈, 색상 또는 스타일의 상품으로 교환하거나 전액 환불받을 수 있습니다.
  • 반품되는 모든 상품은 착용하지 않은 상태여야 하며, 원래 포장 상태 그대로 모든 태그가 손상되지 않은 상태여야 합니다.
간단한 절차
  • 온라인으로 반품을 신청하거나 고객 서비스 팀에 문의하여 도움을 받으실 수 있습니다.
  • 물품을 제대로 포장해 주시고, 원래의 포장 목록도 함께 넣어주세요.
  • 반품하실 상품을 보내주실 때에는 저희가 제공해 드린 선불 배송 라벨을 사용해 주시기 바랍니다.
  • 환불 요청 접수 즉시 처리해 드리겠습니다.

반품과 관련하여 궁금한 점이나 우려 사항이 있으시면 언제든지 저희 전문 고객 서비스 팀에 문의해 주세요. 고객 만족은 저희의 최우선 목표입니다.

범주
차이
제품
모든 제품 지우기