5.0 out of 5 stars Easy to Use - Just Be Aware That It's a Bluetooth Receiver ONLY.

2026-02-04    -Red63Galaxie

1.) It's a Bluetooth receiver only, not a transmitter. It RECEIVES audio via Bluetooth radio from remote devices such as laptops, smartphones, desktop computers, or any devices that transmit audio over a Bluetooth carrier signal - only one device at a time. It WILL NOT SEND/TRANSMIT a signal over the air TO any other device. I'm not trying to belabor the point or be sarcastic, but some of the questions I've seen seem to indicate confusion as to whether it transmits and receives, or just receives.2.) It feeds the audio it receives to an amplifier as a LINE-LEVEL signal via a stereo signal cable (provided) - RCA to 3.5mm or vice-versa. You can use the cable either way depending on your amplifier's input jacks. Both the RCA and Aux. jacks on the Esinkin are line-level OUTPUTS; just use whichever one you need. If necessary, you can use your own cords or adapters to make the correct connections to your amp.3.) Will it drive speakers? ONLY IF they are Powered Speakers, meaning each speaker has its own built-in amplifier. It WILL NOT drive non-powered speakers directly without amplification. Headphones? Probably; I haven't tried it. It would depend on the headphones, and since there is no volume control on the receiver, you would have to be able to adjust the volume at the source: phone, laptop, etc. Proceed with caution so you don't wreck your headphones or your hearing with an initial super loud blast. You know how getting blasted makes it nearly impossible to find the volume control or rip the phones off your head without hurting yourself.4.) Power Supply - It comes with its own plug-in supply and cord, and that's the only way to power it. It WILL NOT run off a USB supply or port on a computer. The input is keyed to the cord supplied with the AC adapter. If that fails, you could probably find replacements.5.) Performance: I am pleased with the quality of the sound. I use it as an input to a 160 watt rms (80 X 2) Onkyo TX-8050 stereo receiver driving 2 pretty decent Pioneer speaker systems from the early 1990s, and it sounds about as good as strong FM reception or CD playback. I don't use the NFC function, so can't comment on that. Range is easily 25 feet, which is no problem for the layout of our living/dining areas. It seems to sync up quickly with my Bluetooth devices.I would recommend it, based on our experience so far.

5.0 out of 5 stars Easy to Use - Just Be Aware That It's a Bluetooth Receiver ONLY.

2025-12-30    -Red63Galaxie

1.) It's a Bluetooth receiver only, not a transmitter. It RECEIVES audio via Bluetooth radio from remote devices such as laptops, smartphones, desktop computers, or any devices that transmit audio over a Bluetooth carrier signal - only one device at a time. It WILL NOT SEND/TRANSMIT a signal over the air TO any other device. I'm not trying to belabor the point or be sarcastic, but some of the questions I've seen seem to indicate confusion as to whether it transmits and receives, or just receives.2.) It feeds the audio it receives to an amplifier as a LINE-LEVEL signal via a stereo signal cable (provided) - RCA to 3.5mm or vice-versa. You can use the cable either way depending on your amplifier's input jacks. Both the RCA and Aux. jacks on the Esinkin are line-level OUTPUTS; just use whichever one you need. If necessary, you can use your own cords or adapters to make the correct connections to your amp.3.) Will it drive speakers? ONLY IF they are Powered Speakers, meaning each speaker has its own built-in amplifier. It WILL NOT drive non-powered speakers directly without amplification. Headphones? Probably; I haven't tried it. It would depend on the headphones, and since there is no volume control on the receiver, you would have to be able to adjust the volume at the source: phone, laptop, etc. Proceed with caution so you don't wreck your headphones or your hearing with an initial super loud blast. You know how getting blasted makes it nearly impossible to find the volume control or rip the phones off your head without hurting yourself.4.) Power Supply - It comes with its own plug-in supply and cord, and that's the only way to power it. It WILL NOT run off a USB supply or port on a computer. The input is keyed to the cord supplied with the AC adapter. If that fails, you could probably find replacements.5.) Performance: I am pleased with the quality of the sound. I use it as an input to a 160 watt rms (80 X 2) Onkyo TX-8050 stereo receiver driving 2 pretty decent Pioneer speaker systems from the early 1990s, and it sounds about as good as strong FM reception or CD playback. I don't use the NFC function, so can't comment on that. Range is easily 25 feet, which is no problem for the layout of our living/dining areas. It seems to sync up quickly with my Bluetooth devices.I would recommend it, based on our experience so far.

5.0 out of 5 stars Very nice addition to my stereo system that works very nicely.

2026-02-28    -Hobbes The Cat

This thing works exceptionally well! It turned an old Onkyo receiver from the 90's into a much more modern, useful sound system that supports my bluetooth entertainment, including Spotify. This blue-tooth receiver will immediately pair with a familiar device, meaning that I can simply turn on my stereo receiver and immediately play tunes stored on Spotify.

5.0 out of 5 stars For my Bose, but

2026-01-03    -LET

I recently got a Bose Wave Music System IV (Radio/CD) but they aren't bluetooth enabled. Hooked this up to it and I can now stream from my phone or iPad - music, podcasts, etc. It was easy to hook up and works perfectly. My only issue is if I keep it plugged into the outlet it causes static when I'm listening to the Bose radio. I just unplug it if I'm using the radio. It even does it if the radio and esinkin are plugged into different wall outlets!? I'm over being annoyed by that since it's easy to unplug it. Bonus! It also works with an older radio with great sound - a Sangean which is in a different room from the Bose so I may get another esinkin...

5.0 out of 5 stars Ease of use for 20 year old Yamaha RxV661receiver

2026-03-03    -rarely reviews

Works excellent pairing with an iPhone 12PM. This is connected via cable to a Yamaha RXV661 Receiver that is 20 years old. Has updated our system to bluetooth with crisp, clear quality and we are thrilled. Note - I do unplug the power after using so that it doesn't have crossover with the iPhone when a call comes in. Just like bluetooth crossover with other connected devices that happen. Also - it's discoverable by anyone in range. So I'd prefer not accidentally picking up the teen neighbors audio by accident over our speakers.

5.0 out of 5 stars Easy to use, works flawlessly.

2026-02-16    -T. A. Clark

It's small, unobtrusive, has decent range, and works perfectly for the speaker setup I have at work. There's not much else to say about it, which is exactly how it should be; just plug it in and go. It's a great device for the price.The only complaint I'd have is that the instructions are pretty useless. They have some pictures that are small enough that you can't make out what they're trying to tell you, so all you need to know is that it works like a cash register payment system. Tap your phone to the top of it and it will ask to pair the devices; when you come back to use it again later, just tap your phone to it again and it'll connect. Really can't be easier to use, but the instructions manage to make it unclear on what to do somehow.

5.0 out of 5 stars Turned My Vintage Kenwood Receiver Into a Bluetooth Hub

2026-02-04    -Travel With Michael

The media could not be loaded. Setup was effortless: I plugged the RCA cables into the CD input on my receiver, paired my phone in seconds, and instantly streamed crystal-clear audio. No lag, no distortion—just pure sound clarity. The compact design fits seamlessly into my setup, and the NFC pairing is a bonus for quick swaps between devices.If you’re curating a home audio ritual or reviving vintage gear, this adapter is a must. It bridges analog legacy with modern convenience, and it’s now a permanent part of my branded workflow. Highly recommend for influencers, reviewers, or anyone scripting sonic clarity into their space.

5.0 out of 5 stars Easy to use, works flawlessly.

2026-01-18    -T. A. Clark

It's small, unobtrusive, has decent range, and works perfectly for the speaker setup I have at work. There's not much else to say about it, which is exactly how it should be; just plug it in and go. It's a great device for the price.The only complaint I'd have is that the instructions are pretty useless. They have some pictures that are small enough that you can't make out what they're trying to tell you, so all you need to know is that it works like a cash register payment system. Tap your phone to the top of it and it will ask to pair the devices; when you come back to use it again later, just tap your phone to it again and it'll connect. Really can't be easier to use, but the instructions manage to make it unclear on what to do somehow.

5.0 out of 5 stars For my Bose, but

2026-01-21    -LET

I recently got a Bose Wave Music System IV (Radio/CD) but they aren't bluetooth enabled. Hooked this up to it and I can now stream from my phone or iPad - music, podcasts, etc. It was easy to hook up and works perfectly. My only issue is if I keep it plugged into the outlet it causes static when I'm listening to the Bose radio. I just unplug it if I'm using the radio. It even does it if the radio and esinkin are plugged into different wall outlets!? I'm over being annoyed by that since it's easy to unplug it. Bonus! It also works with an older radio with great sound - a Sangean which is in a different room from the Bose so I may get another esinkin...

5.0 out of 5 stars Ease of use for 20 year old Yamaha RxV661receiver

2026-01-25    -rarely reviews

Works excellent pairing with an iPhone 12PM. This is connected via cable to a Yamaha RXV661 Receiver that is 20 years old. Has updated our system to bluetooth with crisp, clear quality and we are thrilled. Note - I do unplug the power after using so that it doesn't have crossover with the iPhone when a call comes in. Just like bluetooth crossover with other connected devices that happen. Also - it's discoverable by anyone in range. So I'd prefer not accidentally picking up the teen neighbors audio by accident over our speakers.